D-Link DNR-2020-04P User Manual - Page 39
Set Recording Schedule Configuration, Add/Edit Schedule, Continuous, Recording, Record on event
View all D-Link DNR-2020-04P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Section 3 - Configuration Set Recording Schedule Configuration 1. Select one of the cameras from the list and click on Add/Edit Schedule. 2. Choose a recording mode. The available options are: Continuous Recording, Record on event, and Record on motion. 3. Enter the desired Start time and End time, and choose a day of the week that the recording function will be active. 4. Press the OK button to save the new schedule. Note: • When configuring the motion detection event, be sure to set up the motion detection function on your camera first. • After changing the motion detection settings of your camera, be sure to disconnect the camera from the NVR and then re-connect it to update any new changes. • You can drag the time bar to change the recording period. Select the red bar for Continuous recording feature, the green bar for Record on event and the blue bar for Record on motion feature. D-Link DNR-2020-04P User Manual 35