D-Link DNR-2020-04P User Manual - Page 36
The Image tab has the following settings, Brightness, Contrast, Saturation, Sharpness, Audio Format
View all D-Link DNR-2020-04P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Section 3 - Configuration The Audio tab has the following settings: Audio Format: Select from supported audio formats (G.711, G.726, AAC). Enable Turn on/off the microphone on the camera (if supported). Microphone: Audio-in Gain Select the audio-in gain level for the microphone. Level: Enable Enable audio out on the camera (if supported). Speaker: Audio Out Adjust the volume of the camera's speaker. Volume Level: The Image tab has the following settings: Brightness: Adjust the brightness. Contrast: Adjust the contrast. Saturation: Adjust the saturation. Sharpness: Adjust the sharpness. Note: For some IP cameras, the NVR supports motion detection. D-Link DNR-2020-04P User Manual 32
32
D-Link DNR-2020-04P User Manual
Section 3 - Configuration
Brightness:
Contrast:
Saturation:
Sharpness:
Adjust the brightness.
Adjust the contrast.
Adjust the saturation.
Adjust the sharpness.
The Image tab has the following settings:
Note:
For some IP cameras, the NVR supports motion detection.
Audio Format:
Enable
Microphone:
Audio-in Gain
Level:
Enable
Speaker:
Audio Out
Volume Level:
Select from supported audio formats (G.711, G.726, AAC).
Turn on/off the microphone on the camera (if supported).
Select the audio-in gain level for the microphone.
Enable audio out on the camera (if supported).
Adjust the volume of the camera’s speaker.
The Audio tab has the following settings: