D-Link DNR-2020-04P User Manual - Page 53
Camera Search
View all D-Link DNR-2020-04P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Section 3 - Configuration Camera Search The Camera Search function lets you automatically add cameras to the NVR. You can then view camera information and preview the camera's feed. To add cameras follow the steps below. Step 1: Click either D-link for D-link brand cameras or Onvif for cameras with Onvif certification. Click Search to search for network cameras. The system will list all the available cameras at that point in time. Step 2: Highlight the camera by clicking on it. You can enter the camera name, user name, and password of the camera at the bottom. Step 3: Then click the Add button to add a camera to your camera list. If the cameras are already added, they will be marked red. Notes: • Some cameras will limit the logins to the administrator only. • To add cameras without the UPnP function, please go to the camera Setup menu and enter the IP address manually. • You may not be able to see all the cameras on your first search. It may take a moment for the devices to respond to the UPnP request. Please click Search again if the cameras are not immediately displayed. Step 4: Click Save to add the selected camera to the NVR. Step 5: Click OK in the pop-up window to confirm. Repeat steps 2 through 5 to add other cameras to your list. D-Link DNR-2020-04P User Manual 49