D-Link DVG-3104MS Product Manual - Page 26

Section 3 - Configuration Advanced Line Settings Do Not Disturb: Set the specific line to reject incoming calls. Line Type: Set a specific sound intensity for transmitting sound Pulse Rate: Set a specific volume intensity for receiving sound. VoIP to PSTN (TX): Choose DTMF or Pulse for the signalling type on PSTN lines. PSTN to VoIP (RX): The rate for pulse dialing (10 or 20 PPS) PSTN to VoIP: When Direct Forward is selected and a phone number is entered (e.g. the number of the attendant), all incoming calls which come from PSTN will be directly forwarded to the pre-entered number. If IVR is selected, it plays a greeting to direct the caller to the right extension. T38: Enable / disable T.38 support, normally for FAX users. AC Impedance: The type of impedance which is the characteristic of the connecting PSTN line. Generally, 600 ohm is suitable in most areas and 900 ohm is used in Europe. Please contact your ISP for detail. Apply: Click Apply to upload the settings. D-Link DVG-3104MS User Manual 26