D-Link DVG-3104MS Product Manual - Page 8

Installation

Get D-Link DVG-3104MS - VoiceCenter PSTN Gateway PDF manuals and user guides
UPC - 790069308390
View all D-Link DVG-3104MS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

Section 2 - Installation Installation This section will walk you through the installation process. To connect the DVG-3104MS Gateway, follow these steps: 1. Plug the power adapter into an AC outlet or power strip and plug the other end into the AC input on the back of the gateway. The Power LED will light up to indicate proper connection. 2. Connect one end of the Ethernet cable to the LAN Port on the back of the gateway and connect the other end of the cable to your Local Area Network via switch or hub. The LAN LED will light up to indicate proper connection. 3. Connect the phone cable to an available PSTN (FXO) Port on the back of the gateway and connect the other end to a phone jack. Note: Avoid disabling your existing phone service while setting up VoiceCenter™. If you have an alternative jack available, use it to set up and test VoiceCenter. When you have connected all the lines to the DVG-3104MS Gateway, it should look like the diagram below. D-Link DVG-3104MS User Manual 

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
µ
D-Link DVG-3104MS User Manual
Section ± - Installation
Installation
This section will walk you through the installation process. To connect the DVG-3104MS Gateway, follow these steps:
1. Plug the power adapter into an AC outlet or power strip and plug the other end into the AC input on the back of
the gateway. The Power LED will light up to indicate proper connection.
2. Connect one end of the Ethernet cable to the LAN Port on the back of the gateway and connect the other end of
the cable to your Local Area Network via switch or hub. The LAN LED will light up to indicate proper connection.
3. Connect the phone cable to an available PSTN (FXO) Port on the back of the gateway and connect the other end
to a phone jack.
Note:
Avoid disabling your existing phone service while setting up VoiceCenter
™
. If you have an alternative jack available,
use it to set up and test VoiceCenter.
When you have connected all the lines to the DVG-3104MS Gateway, it should look like the diagram below.