D-Link GO-RT-N300 User Manual - Page 19
If you selected Static IP, enter your IP address, Subnet Mask, Default Gateway, Primary DNS
View all D-Link GO-RT-N300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Section 3 - Coniguration If you selected Static IP, enter your IP address, Subnet Mask, Default Gateway, Primary DNS, and Secondary DNS, and click Next to continue. You can also configure the wireless network and security settings. If you prefer not to, click Disable the wireless radio. Click Next to continue. SSID: Enter the SSID name. Channel: Use the dropdown menu to select the wireless channel. Mode: Use the dropdown menu to specify the wireless mode Channel Width: Use the dropdown menu to select the channel bandwidth. If you selected the 802.11n, 802.11 b/g, or 802.11 b/g/n wireless modes, the available options are 20 MHz and 20/40MHz. For the others, 20MHz is the only option. Disable You can also choose to not use security by selecting this, Security: but this is not recommended. WPA/WPA2- If you select this, enter a passkey in the box below the field. Personal: D-Link GO-RT-N300 User Manual GO-RT-N300 15