D-Link GO-RT-N300 User Manual - Page 28
Wireless, Wireless Basics
![]() |
View all D-Link GO-RT-N300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Section 3 - Coniguration Wireless Wireless Basics This page allows you to configure the wireless LAN settings. You can also configure the wireless encryption and wireless network parameters. Enable SSID Enable SSID broadcast if you want the router to transmit GO-RT-N300 Broadcast: its SSID publicly so other wireless devices can discover it. Enable Wireless Enable wireless isolation to prevent connected wireless Isolation: devices from connecting to other wireless devices that are also connected to the router. GO-RT-N300 Name (SSID): Enter the SSID name of the router. Mode: Use the dropdown menu to specify the wireless mode. Channel: Use the dropdown menu to select the wireless channel. Band Width: Use the dropdown menu to select the channel bandwidth. If you selected the 802.11n, 802.11 b/g, or 802.11 b/g/n wireless modes, the available options are 20 MHz and 20/40MHz. For the others, 20MHz is the only option. Max Select the maximum transmission rate for the wireless Transmission network. Rate: Security Select a wireless security encryption option. You can also Options: choose to not use one by selecting None, but this is not recommended. D-Link GO-RT-N300 User Manual 24
![](/manual_guide/products/dlink-gortn300-user-manual-b0c95f4/28.png)