D-Link GO-RT-N300 User Manual - Page 26
If you choose Static IP, please con the following fields, WAN Access, Subnet Mask, Default
View all D-Link GO-RT-N300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Section 3 - Coniguration If you choose Static IP, please configure the following fields; WAN Access Select Static IP from the drop-down menu. Type: IP Address: Enter the static IP address which was provided to you by your Internet Service Provider (ISP). Subnet Mask: Enter the subnet provided by your ISP. Default Enter the default gateway provided by your ISP. Gateway: MTU Size: Enter the Maximum Transmission Unit size. The default value is 1500. DNS Server 1: Enter the primary DNS server address provided by your ISP. DNS Server 2: Enter the secondary DNS server address provided by your ISP. MAC Clone: Select the MAC address to be used for the connection. Select Default MAC to use the router's MAC address. Select MAC from PC to copy your PC's MAC address, or select MAC Manual to manually enter a MAC address in the field provided. Click Apply Changes to save the current configuration, or click Reset to discard. D-Link GO-RT-N300 User Manual 22