D-Link GO-RT-N300 User Manual - Page 31
Wi-Fi Protected (WPS) Setup - easy wi fi router
View all D-Link GO-RT-N300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Section 3 - Coniguration Wi-Fi Protected (WPS) Setup Wi-Fi Protected Setup (WPS) System is a simplified method for securing your wireless network during the"Initial setup"as well as the "Add New Device" processes. The Wi-Fi Alliance (WFA) has certified it across different products as well as manufacturers. The process is just as easy, as pressing a button for the Push-Button Method or correctly entering the 8-digit code for the PinCode Method. The time reduction in setup and ease of use are quite beneficial, while the highest wireless security setting of WPA2 is automatically used. If you wish to use the Push-Button Connection (PBC) method, simply press the WPS button on the side of the router. The power LED will begin to flash. Within 120 seconds, press the WPS button on the device that you wish to connect. The power LED will turn solid green if the connection is successful. To connect using the PIN method, click Next to begin the WPS setup process. Enter the PIN for the wireless NIC and click Start PIN. If successful, you will then be taken to another screen and a message will tell you to run WPS in the client device within 2 minutes. D-Link GO-RT-N300 User Manual 27