D-Link GO-RT-N300 User Manual - Page 27
When you have finished configuring the WAN settings, click the, button., If you choose PPPoE
![]() |
View all D-Link GO-RT-N300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Section 3 - Coniguration When you have finished configuring the WAN settings, click the Apply Changes button. If you choose PPPoE, please configure the following fields: WAN Access Select PPPoE from the drop-down menu. Type: User Name: Enter the user name provided to you by your ISP. Password: Enter the password provided to you by your ISP. Idle Time: Enter the idle time (in minutes) after which the router will disconnect due to inactivity. To disable this feature, select Continuous as the connection type below. MTU Size: Enter the Maximum Transmission Unit size. The default value is 1492. Static IP If your ISP or network administrator requires you to have a Address: static IP address for your connection, enter it here. Connection Select Continuous, Connect on Demand, or Manual as the Type: connection type from the drop-down menu. If you select Manual, the connect and disconnect buttons will be available. When you have finished configuring the WAN settings, click the Apply Changes button. D-Link GO-RT-N300 User Manual 23
![](/manual_guide/products/dlink-gortn300-user-manual-b0c95f4/27.png)