D-Link GO-RT-N300 User Manual - Page 46
Apply Changes, Delete, Disable, Forwarding Table below. To delete or disable a virtual server - port forwarding
![]() |
View all D-Link GO-RT-N300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Section 3 - Coniguration The Virtual Server page allows you to open a single port. If you would like to open a range of ports, refer to the next page. Usual Service Select an application from the drop-down menu or GO-RT-N300 Name: type a name in the next field. User-defined Enter a service name. Service Name: Protocol: Select TCP or UDP from the Protocol drop-down menu. WAN Port: Enter the WAN port number. LAN Open Port: Enter the LAN Open port number. LAN IP Address: Enter the IP address of the computer on your local network that you want to allow the incoming service to. Click the Apply Changes button to save any changes made. The virtual server will then be added to the Current Virtual Server Forwarding Table below. To delete or disable a virtual server, click the Delete or Disable buttons in the Action field of the virtual server in the table. D-Link GO-RT-N300 User Manual 42
![](/manual_guide/products/dlink-gortn300-user-manual-b0c95f4/46.png)