D-Link GO-RT-N300 User Manual - Page 23

DHCP Server Settings

Get D-Link GO-RT-N300 PDF manuals and user guides View all D-Link GO-RT-N300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Section 3 - Coniguration Local Network DHCP Server Settings DHCP stands for Dynamic Host Control Protocol. The GO-RT-N300 has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to "Obtain an IP Address Automatically." When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the GO-RT-N300. The DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool. DHCP Mode: Choose the DHCP Server option in the pulldown menu to enable the DHCP server on your router. Choose None to disable this function. IP Pool Range: Enter the starting and ending IP addresses for the DHCP server's IP assignment. Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. Max Lease Time: The maximum length of time for the IP address lease. Enter the Lease time in minutes. Domain Name: Enter the domain name. DNS Server 1: Enter the IP address of the first DNS Server. DNS Server 2: Enter the IP address of the second DNS Server, if there is one. DNS Server 3: Enter the IP address of the third DNS Server, if there is one. When you have finished configuring the new DHCP Server Settings, click the Apply Changes button. D-Link GO-RT-N300 User Manual 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
19
D-Link GO-RT-N300 User Manual
Section 3 - Con±guration
DHCP stands for Dynamic Host Control Protocol. The GO-RT-N300 has a built-in DHCP server. The DHCP Server will automatically
assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting
their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your computers on, they will automatically load
the proper TCP/IP settings provided by the GO-RT-N300. The DHCP Server will automatically allocate an unused IP address
from the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool.
Choose the
DHCP Server
option in the pulldown menu to
enable the DHCP server on your router. Choose
None
to disable
this function.
Enter the starting and ending IP addresses for the DHCP server’s
IP assignment.
Note:
If you statically (manually) assign IP addresses to your
computers or devices, make sure the IP addresses are outside of
this range or you may have an IP conflict.
The maximum length of time for the IP address lease. Enter the Lease time in minutes.
Enter the domain name.
Enter the IP address of the first DNS Server.
Enter the IP address of the second DNS Server, if there is one.
Enter the IP address of the third DNS Server, if there is one.
DHCP Mode:
±P Pool Range:
Max Lease Time:
Domain Name:
DNS Server 1:
DNS Server 2:
DNS Server 3:
Local Network
DHCP Server Settings
When you have finished configuring the new DHCP Server Settings, click the
Apply Changes
button.