D-Link H.265 User Manual 1.30 WW - Page 16

Accessing the Admin Interface

Get D-Link H.265 PDF manuals and user guides View all D-Link H.265 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Section 3: Configuration Accessing the Admin Interface 1. Ensure that your camera is plugged in (either using a 12 V 1.5 A power adapter or a PoEenabled device) and connected to your computer with an Ethernet cable. 2. Open the Setup Wizard. It will display the MAC address and IP address of your camera. If you have a DHCP server on your network, this will be a dynamic IP address. If your network does not use a DHCP server, the network camera's default static IP 192.168.0.20 will be displayed. Select your camera, then click the Link button to continue. 3. If this is your first time logging in, you will be prompted to create a password, which must be between 8 and 30 characters and must contain both letters and numbers. Press Save. 4. To view the camera stream and configure the camera, on the main screen of the Setup Wizard, click the Search button, then select your camera and click the Link button to open the Web UI. Alternatively, open a web browser and type the camera's IP address (displayed in step 2) into the URL bar and press Enter. 5. Enter the password you created, and click Login to continue. D-Link Vigilance H.265 Outdoor Bullet Camera User Manual 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
16
D-Link Vigilance H.265 Outdoor Bullet Camera User Manual
Section 3: Configuration
1.
Ensure that your camera is plugged in (either using a 12 V 1.5 A power adapter or a PoE-
enabled device) and connected to your computer with an Ethernet cable.
2.
Open the Setup Wizard. It will display the MAC address and IP address of your camera.
If you have a DHCP server on your network, this will be a dynamic IP address. If your
network does not use a DHCP server, the network camera's default static IP
192.168.0.20
will be displayed. Select your camera, then click the
Link
button to continue.
3.
If this is your first time logging in, you will be prompted to create a password, which must
be between 8 and 30 characters and must contain both letters and numbers. Press
Save.
4.
To view the camera stream and configure the camera, on the main screen of the Setup
Wizard, click the
Search
button, then select your camera and click the
Link
button to
open the Web UI. Alternatively, open a web browser and type the camera's IP address
(displayed in step 2) into the URL bar and press
Enter.
5.
Enter the password you created, and click
Login
to continue.
Accessing the Admin Interface