D-Link H.265 User Manual 1.30 WW - Page 23

Step 1: Configure LAN Settings, IP Address, Subnet Mask, Default, Gateway, Default Router

Get D-Link H.265 PDF manuals and user guides View all D-Link H.265 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Section 3: Configuration Step 1: Configure LAN Settings DHCP Select this connection if you have a DHCP server running on your network and would like your camera to obtain an IP address automatically. If you choose DHCP, you do not need to fill out the IP address settings. IP Address Enter the fixed IP address in this field. Subnet Mask This number is used to determine if the destination is in the same subnet. The default value is 255.255.255.0. Default Enter the gateway used to forward frames to destinations in a different Gateway subnet. Invalid gateway settings may cause the failure of transmissions to a different subnet. Default Router Enter the IP address of the default router. Primary DNS Enter the primary domain name server for translating domain names to IP addresses. MTU (1280- Enter the maximum transmission unit. The default value is 1500. 1500) D-Link Vigilance H.265 Outdoor Bullet Camera User Manual 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
23
D-Link Vigilance H.265 Outdoor Bullet Camera User Manual
Section 3: Configuration
Step 1: Configure LAN Settings
DHCP
IP Address
Subnet Mask
Default
Gateway
Default Router
Primary DNS
MTU (1280-
1500)
Select this connection if you have a DHCP server running on your network
and would like your camera to obtain an IP address automatically.
If you choose DHCP, you do not need to fill out the IP address settings.
Enter the fixed IP address in this field.
This number is used to determine if the destination is in the same subnet.
The default value is
255.255.255.0
.
Enter the gateway used to forward frames to destinations in a different
subnet. Invalid gateway settings may cause the failure of transmissions to
a different subnet.
Enter the IP address of the default router.
Enter the primary domain name server for translating domain names to IP
addresses.
Enter the maximum transmission unit. The default value is
1500.