D-Link H.265 User Manual 1.30 WW - Page 41
ICR & IR, Day/Night, Settings, Delays, Sensitivity, IR LED, IR LED Mode
![]() |
View all D-Link H.265 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Section 3: Configuration ICR & IR Use this section to configure the IR LED and IR-cut removable filter behavior for your camera. Day/Night Day Mode enables the IR Cut Filter and turns off the IR LEDs. Night Mode Settings disables the IR Cut Filter and turns on the IR LEDs. Select Auto to set the day/night mode automatically according to the amount of light in the environment, or Timing to set it according to a schedule. Delay(s)/ If Auto is selected, configure how long the camera should wait after a Sensitivity change in lighting conditions to adjust between the day/night mode, and how sensitive it is to changes in the environment. IR LED Toggle to enable or disable the IR LED. IR LED Mode Select Manual to set the IR LED level or Auto to have the camera adjust it automatically. D-Link Vigilance H.265 Outdoor Bullet Camera User Manual 41
![](/manual_guide/products/dlink-h265-user-manual-130-ww-7243801/41.png)