D-Link H.265 User Manual 1.30 WW - Page 37

RTSP and Multicast, Multicast

Page 37 highlights

Section 3: Configuration RTSP and Multicast Use this section to configure your camera's RTSP and multicast stream settings. Click Save at any time to save the changes. RTSP RTSP Port: Set the port to use for RTSP streaming. The default is 554. RTSP Rule This indicates the format of the RTSP path. RTSP Example This provides an example of an RTSP path. The camera allows you to multicast each of the available streams via a group address. Enter the port and settings you wish to use. Multicast Stream ID Select an ID for the stream. Video Port Select the port to multicast the stream over. Video Address Enter an address for the multicast stream. D-Link Vigilance H.265 Outdoor Bullet Camera User Manual 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85

37
D-Link Vigilance H.265 Outdoor Bullet Camera User Manual
Section 3: Configuration
RTSP and Multicast
RTSP Port:
RTSP Rule
RTSP Example
Set the port to use for RTSP streaming. The default is
554.
This indicates the format of the RTSP path.
This provides an example of an RTSP path.
Use this section to configure your camera's RTSP and multicast stream settings. Click
Save
at any time to save the changes.
RTSP
Multicast
Stream ID
Video Port
Video Address
Select an ID for the stream.
Select the port to multicast the stream over.
Enter an address for the multicast stream.
The camera allows you to multicast each of the available streams via a group address. Enter
the port and settings you wish to use.