Dell 5350dn Mono Laser Printer User's Guide - Page 179
Skewed print, Solid black or white streaks appear on transparencies or paper, PAPER, GUIDES, NSURE
View all Dell 5350dn Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
Replace the transfer roller if the defects occur every: 58.7 mm (2.31 in.) Replace the photoconductor if the defects occur every: 44 mm (1.73 in.) Replace the fuser if the defects occur every: • 78.5 mm (3.09 in.) • 94.2 mm (3.71 in.) Skewed print These are possible solutions. Try one or more of the following: CHECK THE PAPER GUIDES Move the guides in the tray to the correct positions for the paper size loaded. CHECK THE PAPER Make sure you are using paper that meets the printer specifications. Solid black or white streaks appear on transparencies or paper These are possible solutions. Try one or more of the following: ENSURE THAT THE FILL PATTERN IS CORRECT If the fill pattern is incorrect, choose a different fill pattern from your software program. CHECK THE PAPER TYPE • Try a different type of paper. • Use only the recommended transparencies. • Ensure that the Paper Type setting matches what is loaded in the tray or feeder. • Ensure that the Paper Texture setting is correct for the type of paper or specialty media loaded in the tray or feeder. ENSURE THAT THE TONER IS DISTRIBUTED EVENLY WITHIN THE TONER CARTRIDGE Remove the toner cartridge and shake it from side to side to redistribute the toner, and then reinstall it. Troubleshooting 179