Dell 5350dn Mono Laser Printer User's Guide - Page 82
Printing information s, Printing a font sample list, Printing a directory list
View all Dell 5350dn Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Printing information pages Printing a font sample list To print samples of the fonts currently available for your printer: 1 Make sure the printer is on and Ready appears. 2 From the printer control panel, press . 3 Press the up or down arrow button until Reports appears, and then press . 4 Press the up or down arrow button until Print Fonts appears, and then press . 5 Press the up or down arrow button until appears next to PCL Fonts, PostScript Fonts, or PPDS Fonts, and then press . After the font sample list prints, Ready appears. Printing a directory list A directory list shows the resources stored in flash memory or on the hard disk. 1 Make sure the printer is on and Ready appears. 2 From the printer control panel, press . 3 Press the up or down arrow button until Reports appears, and then press . 4 Press the up or down arrow button until Print Directory appears, and then press . After the directory list prints, the printer returns to the Ready state. Printing the print quality test pages Print the print quality test pages to isolate print quality problems. 1 Turn the printer off. 2 Hold down and the right arrow button while turning the printer on. 3 Release the buttons when the clock appears, and wait for CONFIG MENU to appear. 4 Press the up or down arrow button until Prt Quality Pgs appears, and then press . The print quality test pages print. 5 Press the up or down arrow button until Exit Config Menu appears, and then press . Resetting the Printer appears briefly, followed by a clock, and then Ready appears. Printing 82