Dell 7130cdn Color Laser Printer User Guide - Page 36
IPv6, Enabling IPv6
View all Dell 7130cdn Color Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Network Basics IPv6 This section includes: • Enabling IPv6 on page 36 • Setting the Interface ID on page 37 • Automatic Address Assignment on page 38 • DHCPv6 on page 38 • Manual Address Assignment on page 39 • Address Precedence on page 40 Enabling IPv6 IPv6 can be enabled or disabled independently of IPv4. Note: If you disable both IPv4 and IPv6, you will lose your connection to the printer. For information on restoring the default TCP/IP settings, see Resetting the TCP/IP Configuration on page 37. To enable/disable IPv6, use one of the following options: • The printer's control panel • Embedded Web Server Using the Control Panel To enable/disable IPv6 on the control panel: 1. Select Printer Setup > Connection Setup > Network Setup > TCP/IPv6 Setup, then press the OK button. 2. Select IPv6, then press the OK button to switch between On and Off. Using the Embedded Web Server To enable/disable IPv6 using the Embedded Web Server: 1. Launch your Web browser. 2. Enter your printer's IP address in the browser's Address field. 3. Click Properties. 4. Select the Protocols folder on the left navigation panel, then click TCP/IP. 5. Click the TCP/IP (v6) button. 6. Select the TCP/IP v6 Enabled check box to enable TCP/IP v6. 7. Click the Save Changes button at the bottom of the page. 36 Dell 7130cdn Professional Color Printer User Guide