Dell 7130cdn Color Laser Printer User Guide - Page 38

Automatic Address Assignment, DHCPv6

Get Dell 7130cdn Color Laser Printer PDF manuals and user guides View all Dell 7130cdn Color Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Network Basics Automatic Address Assignment Addresses can be assigned automatically when a router is found that offers one or more prefixes. Automatically assigned addresses are routeable. Each router-supplied prefix is combined with the Interface ID to create an address. The use of router-supplied prefixes is enabled by default. To enable/disable automatic address assignment, use one of the following options: • The printer's control panel • Embedded Web Server Enabling/Disabling Automatic Address Assignment with the Control Panel To set the Interface ID on the control panel: 1. Select Printer Setup > Connection Setup > Network Setup > TCP/IPv6 Setup, then press the OK button. 2. Select Auto Assign, then press the OK button to turn Auto Assign On or Off. Enabling/Disabling Automatic Address Assignment with the Embedded Web Server To set the Interface ID with the Embedded Web Server: 1. Launch your Web browser. 2. Enter your printer's IP address in the browser's Address field. 3. Click Properties. 4. Select the Protocols folder on the left navigation panel, then click TCP/IP. 5. Click the TCP/IP (v6) button. 6. Select/deselect Use router supplied prefixes. 7. Click the Save Changes button at the bottom of the page. DHCPv6 DHCPv6 is used to acquire TCP/IP information. The following DHCPv6 options are available in the Embedded Web Server: • As directed by the router - DHCPv6 is performed according to values in a router advertisement. This is the default setting. • Always, for all configuration options (stateful) - Stateful DHCPv6 is always attempted, and router flags related to how to perform DHCP are ignored. Configuration options and an IPv6 address will be accepted if DHCPv6 is successful. • Always, for all configuration options except address (stateless) - Stateless DHCPv6 is always attempted, and router flags related to how to perform DHCP will be ignored. Configuration options will be accepted if DHCPv6 is successful, but no IPv6 address will be assigned. • Never - DHCPv6 is not used even if directed to do so by a router. 38 Dell 7130cdn Professional Color Printer User Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
Network Basics
Dell 7130cdn Professional Color Printer
User Guide
38
Automatic Address Assignment
Addresses can be assigned automatically when a router is found that offers one or more prefixes.
Automatically assigned addresses are routeable. Each router-supplied prefix is combined with
the Interface ID to create an address. The use of router-supplied prefixes is enabled by default.
To enable/disable automatic address assignment, use one of the following options:
•
The printer’s control panel
•
Embedded Web Server
Enabling/Disabling Automatic Address Assignment with the Control Panel
To set the Interface ID on the control panel:
1.
Select
Printer Setup
>
Connection Setup
>
Network Setup
>
TCP/IPv6 Setup
, then press
the
OK
button.
2.
Select
Auto Assign
, then press the
OK
button to turn Auto Assign
On
or
Off
.
Enabling/Disabling Automatic Address Assignment with the Embedded
Web Server
To set the Interface ID with the Embedded Web Server:
1.
Launch your Web browser.
2.
Enter your printer’s IP address in the browser’s
Address
field.
3.
Click
Properties
.
4.
Select the
Protocols
folder on the left navigation panel, then click
TCP/IP
.
5.
Click the
TCP/IP (v6)
button.
6.
Select/deselect
Use router supplied prefixes
.
7.
Click the
Save Changes
button at the bottom of the page.
DHCPv6
DHCPv6 is used to acquire TCP/IP information.
The following DHCPv6 options are available in the Embedded Web Server:
•
As directed by the router
- DHCPv6 is performed according to values in a router
advertisement. This is the default setting.
•
Always, for all configuration options (stateful)
- Stateful DHCPv6 is always attempted,
and router flags related to how to perform DHCP are ignored. Configuration options and an
IPv6 address will be accepted if DHCPv6 is successful.
•
Always, for all configuration options except address (stateless)
- Stateless DHCPv6 is
always attempted, and router flags related to how to perform DHCP will be ignored.
Configuration options will be accepted if DHCPv6 is successful, but no IPv6 address will be
assigned.
•
Never
- DHCPv6 is not used even if directed to do so by a router.