Dell Alienware 17 R2 Service Manual - Page 119
Replacing the logo board, Procedure, Post-requisites
View all Dell Alienware 17 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Replacing the logo board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure 1 Adhere the logo board on the display bezel. 2 Connect the logo-board cable to the logo board and adhere the adhesive tape. 3 Slide the display-board cables to their respective connectors on the logo board and press down the latches to secure the cables. Post-requisites 1 Replace the display bezel. 2 Replace the display assembly. 3 Follow the procedure from step 5 to step 11 in "Replacing the palm rest". 4 Replace the wireless card. 5 Replace the base panel. 119