Dell Alienware 17 R2 Service Manual - Page 33
Replacing the wireless card, Procedure, Post-requisites
View all Dell Alienware 17 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Replacing the wireless card WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure CAUTION: To avoid damaging the wireless card, do not place any cables under it. 1 Align the notch on the wireless card with the tab on the wireless-card slot. 2 Slide the wireless card at an angle into the wireless-card slot. 3 Connect the antenna cables to the wireless card. The following table provides the antenna-cable color scheme for the wireless card supported by your computer. Connectors on the wireless card Antenna-cable color Main (white triangle) White Auxiliary (black triangle) Black 4 Align the screw hole on the wireless-card bracket with the screw hole on the wireless card. 5 Replace the screw that secures the wireless-card bracket and the wireless card to the system board. Post-requisites Replace the base panel. 33