Dell Alienware 17 R2 Service Manual - Page 68
Replacing the I/O board, Procedure, Post-requisites
View all Dell Alienware 17 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Replacing the I/O board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure 1 Align the ports on the I/O board with the slots on the computer base. 2 Align the screw holes on the I/O board with the screw holes on the computer base. 3 Replace the screws that secure the I/O board to the computer base. 4 Connect the I/O-board cable to the I/O board. 5 Connect the subwoofer cable to the I/O board. Post-requisites 1 Follow the procedure from step 5 to step 11 in "Replacing the palm rest". 2 Replace the base panel. 68