Dell Alienware 17 R2 Service Manual - Page 95
Replacing the power-adapter port, Procedure, Post-requisites
View all Dell Alienware 17 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Replacing the power-adapter port WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure 1 Slide the power-adapter port into the slot on the computer base. 2 Align the screw holes on the power-adapter port bracket with the screw holes on the power-adapter port. 3 Replace the screws that secure the power-adapter port bracket to the power-adapter port. 4 Route the power-adapter port cable through the routing guides on the computer base. Post-requisites 1 Replace the system board. 2 Replace the display assembly. 3 Follow the procedure from step 5 to step 11 in "Replacing the palm rest". 4 Replace the wireless card. 5 Replace the base panel. 95