Dell Alienware 17 R2 Service Manual - Page 44
Replacing the power-button board, Procedure, Post-requisites
View all Dell Alienware 17 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Replacing the power-button board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure 1 Align the screw holes on the power-button board with the screw holes on the palm-rest assembly. 2 Replace the screws that secure the power-button board to the palm-rest assembly. 3 Connect the power-button board cable to the power-button board. 4 Slide the touch-pad cable and the status-light cable into their respective connectors on the power-button board and press down the latches to secure the cables. Post-requisites 1 Follow the procedure from step 5 to step 11 in "Replacing the palm rest". 2 Replace the base panel. 44