Dell Alienware 17 R3 Service Manual - Page 135
Replacing the display back-cover, Procedure, Post-requisites
View all Dell Alienware 17 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Replacing the display backcover WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure NOTE: This chapter is applicable only if you have purchased a laptop with non-touchscreen display. 1 Replace the AlienFX AlienHead board. 2 Replace the AlienFX Display light. 3 Adhere the display-board and camera cable to the display back-cover. 4 Route the display-board cable through the routing guides on the display back-cover. 5 Connect the camera cable to the camera module. Post-requisites 1 Replace the Alienware AlienHead LED board. 2 Replace the display-panel AlienFX LEDs. 3 Replace the camera. 4 Replace the display panel. 5 Replace the display bezel. 6 Replace the display assembly. 7 Follow the procedure from step 5 to step 11 in "Replacing the palm rest". 8 Replace the wireless card. 9 Replace the base panel. 135