Dell Alienware 17 R3 Service Manual - Page 52
Removing the display assembly, Prerequisites, Procedure
View all Dell Alienware 17 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Removing the display assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the base panel. 2 Follow the procedure from step 1 to step 9 in "Removing the palm rest". Procedure 1 Close the display and turn the computer over. 2 Remove the screws that secure the display assembly to the computer base. 3 Remove the screw that secures the wireless-card bracket and the wireless card to the system board. 4 Lift the wireless-card bracket off the wireless card. 52