Dell Alienware 17 R3 Service Manual - Page 53
Carefully remove the antenna cables up from the computer base
View all Dell Alienware 17 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
5 Disconnect the antenna cables from the wireless card. 1 wireless-card bracket 3 antenna cables 2 screws (3) 6 Turn the computer over and open the display. 7 Peel off the adhesive tape that secures the antenna cables to the system board. 8 Carefully remove the antenna cables up from the computer base and remove it from the routing guides on the display hinges. 9 Lift the latch and disconnect the display cable from the system board. 10 Remove the display cable from the routing guide on the display hinge. 53
5
Disconnect the antenna cables from the wireless card.
1
wireless-card bracket
2
screws (3)
3
antenna cables
6
Turn the computer over and open the display.
7
Peel off the adhesive tape that secures the antenna cables to the system
board.
8
Carefully remove the antenna cables up from the computer base and
remove it from the routing guides on the display hinges.
9
Lift the latch and disconnect the display cable from the system board.
10
Remove the display cable from the routing guide on the display hinge.
53