Dell Alienware 17 R3 Service Manual - Page 74
Replacing the processor fan, Procedure, Post-requisites
View all Dell Alienware 17 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Replacing the processor fan WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Using the alignment posts on the computer base, slide and place the processor fan on the computer base. 2 Align the screw holes on the processor fan with the screw holes on the computer base. 3 Adhere the Mylar on the processor fan and processor heat-sink. 4 Replace the screws that secure the processor fan to the computer base. 5 Close the display and turn the computer over. 6 Connect the processor-fan cable to the system board. Post-requisites 1 Follow the procedure from step 5 to step 11 in "Replacing the palm rest". 2 Replace the base panel. 74