Dell Alienware M17x Manual - Page 27
Configuring the BIOS
UPC - 074450000071
View all Dell Alienware M17x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Configuring the BIOS System Setup The System Setup options allow you to: • Change the system configuration information after you add, change, or remove any hardware in your notebook. • Set or change a user-selectable option. • Read the current amount of memory or set the type of hard drive installed. Before you use System Setup, it is recommended that you write down the current System Setup information for future reference. CAUTION: Do not change the settings in System Setup unless you are an expert computer user. Certain changes can cause your computer to work incorrectly. CHAPTER 4: USING YOUR NOTEBOOK Entering System Setup 1. Turn on (or restart) your notebook. 2. While the notebook is booting, press immediately to access the BIOS Setup Utility. If an error occurs during POST (Power On Self Test), you may also enter the BIOS Setup Utility by pressing when prompted. NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop, then shut down your notebook and try again. NOTE: Keyboard failure may result when a key on the keyboard is held down for extended periods of time. To avoid possible keyboard failure, press and release in even intervals until the System Setup screen appears. System Setup Screens The BIOS Setup Utility window displays current or changeable configuration information for your notebook. Information is divided into five menus: Main, Advanced, Security, Boot, and Exit. Key functions appear at the bottom of the Setup Utility screen and lists keys and their functions within the active field. 027 /027