Dell Alienware m15 Service Manual - Page 14

Screw list

Page 14 highlights

Screw list NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced. NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when replacing a component. NOTE: Screw color may vary with the configuration ordered. Table 1. Screw list Component Base cover Secured to Palm-rest assembly Screw type M2.5x10 Quantity 6 Screw image Base cover Palm-rest assembly M2.5x10 2 Battery (Half-length) Palm-rest assembly M2x5 4 Battery (Full-length) Palm-rest assembly M2x5 6 Hard-drive assembly Palm-rest assembly M2x5 4 Heat-sink assembly Heat-sink assembly System board System board M2x3 5 M2x5 1 Fan Heat sink M2x3 2 Wireless-card bracket System board M2x3 1 Solid-state drive bracket Palm-rest assembly M2x3 1 Solid-state drive Solid-state drive bracket M2x2 1 I/O board Palm-rest assembly M2x5 1 Touchpad Palm-rest assembly M2x2.5 4 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106

Screw list
NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws,
and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw
type is restored when the component is replaced.
NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when
replacing a component.
NOTE: Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Secured to
Screw type
Quantity
Screw image
Base cover
Palm-rest assembly
M2.5x10
6
Base cover
Palm-rest assembly
M2.5x10
2
Battery (Half-length)
Palm-rest assembly
M2x5
4
Battery (Full-length)
Palm-rest assembly
M2x5
6
Hard-drive assembly
Palm-rest assembly
M2x5
4
Heat-sink assembly
System board
M2x3
5
Heat-sink assembly
System board
M2x5
1
Fan
Heat sink
M2x3
2
Wireless-card bracket
System board
M2x3
1
Solid-state drive bracket
Palm-rest assembly
M2x3
1
Solid-state drive
Solid-state drive bracket
M2x2
1
I/O board
Palm-rest assembly
M2x5
1
Touchpad
Palm-rest assembly
M2x2.5
4
14