Dell Alienware m15 Service Manual - Page 78
Post-requisites, Entering the Service Tag in the BIOS setup program, Service Tag Input
View all Dell Alienware m15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
13 Replace the two screws (M2x3) that secure the USB Type-C port bracket to the system board. Post-requisites 1 Replace the power-adapter port. 2 Follow the procedure from step 2 to step 7 in Replacing the heat sink. 3 Replace the solid-state drive/Intel Optane. 4 Replace the wireless card. 5 Replace the memory modules. 6 Follow the procedure from step 4 to step 6 in Replacing the hard drive. 7 Replace the battery (half-length) or the battery (full-length), whichever applicable. 8 Replace the base cover. Entering the Service Tag in the BIOS setup program 1 Turn on or restart your computer. 2 Press F2 when the Dell logo is displayed to enter the BIOS setup program. 3 Navigate to the Main tab and enter the Service Tag in the Service Tag Input field. NOTE: Service tag is the alphanumeric identifier located at the back side of your computer. 78