Dell Alienware m15 Service Manual - Page 80
Replacing the power-button board, Procedure, Post-requisites
View all Dell Alienware m15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Replacing the power-button board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Align the screw holes on the power-button board with the screw holes on the palm-rest assembly. 2 Replace the three screws (M2x3) that secure the power-button board to the palm-rest assembly. 3 Adhere the Mylar that covers the power-button board to the palm-rest assembly. Post-requisites 1 Replace the system board. 2 Replace the power-adapter port. 3 Replace the solid-state drive/Intel Optane. 4 Follow the procedure from step 2 to step 7 in Replacing the heat sink. 5 Replace the wireless card. 6 Follow the procedure from step 4 to step 6 in Replacing the hard drive. 7 Replace the battery (half-length) or the battery (full-length), whichever applicable. 8 Replace the base cover. 80