Dell Alienware m15 Service Manual - Page 65
Replacing the power-adapter port, Procedure, Post-requisites
View all Dell Alienware m15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Replacing the power-adapter port WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Connect the power-adapter port cable to the system board. 2 Adhere the tape that secures the power-adapter port cable to the system board. 3 Place the power-adapter port into the slot, and adhere the power-adapter port on the palm-rest assembly. 4 Clip and rotate the power-adapter port bracket onto the power-adapter port. 5 Replace the screw (M2x3) that secures the power-adapter port bracket to the system board and palm-rest assembly. Post-requisites 1 Follow the procedure from step 2 to step 7 in Replacing the heat sink. 2 Replace the base cover. 65