Dell Alienware m17 Service Manual - Page 25
Removing the battery (full-length), Prerequisites, Procedure
![]() |
View all Dell Alienware m17 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Removing the battery (full-length) WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites Remove the base cover. Procedure 1 Using the pull tab, disconnect the battery cable from the system board (applicable only if not disconnected earlier). 2 Remove the six screws (M2x5) that secure the battery to the palm-rest assembly. 3 Lift the battery off the palm-rest assembly. 25
![](/manual_guide/products/dell-alienware-m17-service-manual-3defe5b/25.png)
Removing the battery (full-length)
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
Before working inside your computer
. After working inside your computer, follow the instructions
in
After working inside your computer
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
.
Prerequisites
Remove the
base cover
.
Procedure
1
Using the pull tab, disconnect the battery cable from the system board (applicable only if not disconnected earlier).
2
Remove the six screws (M2x5) that secure the battery to the palm-rest assembly.
3
Lift the battery off the palm-rest assembly.
25