Dell Alienware m17 Service Manual - Page 85
Follow the procedure from step 2 to step 6 in, whichever applicable.
View all Dell Alienware m17 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
10 Connect the power-button board cable to the system board. 11 Place and align the USB Type-C port bracket on the palm-rest assembly. 12 Replace the two screws (M2x3) that secure the USB Type-C port bracket to the palm-rest assembly. 13 Connect the camera cable to the system board and adhere the tape that secures the camera cable to the system board. 14 Connect the coin-cell battery to the system board. 15 Connect the I/O-board cable to the system board and close the latch to secure the cable. 16 Adhere the tape that secures the I/O-board cable connector latch to the system board. Post-requisites 1 Follow the procedure from step 2 to step 6 in Replacing the heat sink. 2 Replace the solid-state drive/Intel Optane. 3 Replace the wireless card. 4 Replace the memory modules. 5 Follow the procedure from step 4 to step 6 in Replacing the hard drive. 6 Replace the battery (half-length) or the battery (full-length), whichever applicable. 7 Replace the base cover. 85