Dell Alienware m17 Service Manual - Page 64

Replacing the speakers, Procedure, Post-requisites

Page 64 highlights

Replacing the speakers WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure NOTE: If the rubber grommets are pushed out of the speakers when removing the speakers, push them back in place before replacing the speakers. 1 Using the alignment posts and rubber grommets, place the speakers in the slots on the palm-rest assembly. 2 Route the speaker cable through the routing guides on the palm-rest assembly. 3 Connect the speaker cable to the system board. Post-requisites 1 Follow the procedure from step 4 to step 6 in Replacing the hard drive. 2 Replace the battery (half-length) or the battery (full-length), whichever applicable. 3 Replace the base cover. 64

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111

Replacing the speakers
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
Before working inside your computer
. After working inside your computer, follow the instructions
in
After working inside your computer
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
.
Procedure
NOTE: If the rubber grommets are pushed out of the speakers when removing the speakers, push them back in place
before replacing the speakers.
1
Using the alignment posts and rubber grommets, place the speakers in the slots on the palm-rest assembly.
2
Route the speaker cable through the routing guides on the palm-rest assembly.
3
Connect the speaker cable to the system board.
Post-requisites
1
Follow the procedure from step 4 to step 6 in
Replacing the hard drive
.
2
Replace the
battery (half-length)
or the
battery (full-length)
, whichever applicable.
3
Replace the
base cover
.
64