Dell Alienware m17 Service Manual - Page 75
Removing the display panel, Prerequisites, Procedure
View all Dell Alienware m17 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Removing the display panel WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Remove the wireless card. 3 Remove the display assembly. 4 Remove the display bezel. Procedure NOTE: Ensure that the display assembly is placed on a clean and flat surface. 1 Remove the four screws (M2x3) that secure the display panel to the display back-cover and antenna assembly. 2 Gently lift the display panel and turn it over. 3 Peel the tape that secures the display-cable connector latch to the display panel. 4 Open the latch and disconnect the display cable from the display panel. 75