Dell Alienware m17 Service Manual - Page 89
Removing the power-adapter port, Prerequisites, Procedure
View all Dell Alienware m17 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Removing the power-adapter port WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Remove the battery (half-length) or the battery (full-length), whichever applicable. 3 Follow the procedure from step 1 to step 3 in Removing the hard drive. 4 Remove the wireless card. 5 Remove the solid-state drive/Intel Optane. 6 Follow the procedure from step 1 to step 5 in Removing the heat sink. 7 Remove the system board. Procedure 1 Remove the two screws (M2.5x4.5) that secure the power-adapter port bracket to the palm-rest assembly. 2 Lift the power-adapter port bracket off the palm-rest assembly. 3 Lift the power-adapter port from the slot on the palm-rest assembly. 4 Peel the Mylar off the power-button board. 89