Dell Alienware m17 Service Manual - Page 87
Removing the power-button board, Prerequisites, Procedure
![]() |
View all Dell Alienware m17 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Removing the power-button board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Remove the battery (half-length) or the battery (full-length), whichever applicable. 3 Follow the procedure from step 1 to step 3 in Removing the hard drive. 4 Remove the wireless card. 5 Follow the procedure from step 1 to step 5 in Removing the heat sink. 6 Remove the solid-state drive/Intel Optane. 7 Remove the system board. Procedure 1 Peel the Mylar off the power-button board. 2 Remove the three screws (M2x3) that secure the power-button board to the palm-rest assembly. 3 Lift the power-button board off the palm-rest assembly. 87
![](/manual_guide/products/dell-alienware-m17-service-manual-3defe5b/87.png)