Dell Force10 S2410-01-10GE-24P SFTOS Command Reference - Page 116

www.dell.com | support.dell.com inlinepower priority Configure the priority of a port in terms of access to power. Syntax inlinepower priority {critical | high | low} Parameters critical | high | low Enter critical to enable the selected port to receive power at the highest priority. Enter high to enable the selected port to receive power at the next highest priority. Enter low to set the power priority of the selected port at the lowest level. Defaults By default, the power priority of a port is set to low. Mode Interface Config; Interface Range Ethernet Command History Related Commands Version 2.5.1 Introduced show inlinepower (stack) show inlinepower Display PoE status of stack members. Display PoE status of designated port. inlinepower limit Configure the power limit of a port (the number of watts available to it if PoE is enabled and other ports do not have higher priority access to the power budget). Syntax inlinepower limit 1-18 Parameters 1-18 Enter an integer from 1 to 18, representing the maximum number of watts to make available to the selected port. Defaults 18 (18 watts) Mode Interface Config; Interface Range Ethernet Command History Version 2.5.1 Introduced Related Commands show inlinepower (stack) show inlinepower Display PoE status of stack members. Display PoE status of designated port. inlinepower type Enter a power profile description of the port. Syntax inlinepower type type-string 116 | System Configuration Commands