Dell Force10 S2410-01-10GE-24P SFTOS Command Reference - Page 416
ip vrrp ip, ip vrrp mode
View all Dell Force10 S2410-01-10GE-24P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 416 highlights
www.dell.com | support.dell.com The no ip vrrp vrID authentication command sets the default authorization details value for the virtual router configured on a specified interface. Default no authorization Mode Interface Config; Interface VLAN; Interface Range, which is indicated by the (conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#. Command History Related Commands Version 2.3 Added Interface Range and Interface VLAN modes. interface range interface vlan ip vrrp Defines an interface range and accesses the Interface Range mode Creates a new VLAN and assigns it an ID, and then enters the Interface VLAN mode, which provides access to VLAN configuration commands for the specified VLAN. Sets the VRID (virtual router ID) on an interface for virtual router configuration in the router. This command also has options. ip vrrp ip This command sets the IP address value for a virtual router. Syntax ip vrrp vrID ip addr [secondary] The parameter vrID is the virtual router ID which has an integer value range from 1 to 255. The value for addr is the IP address to be configured on that interface for VRRP. (OPTIONAL) The keyword secondary designates that the IP address is a secondary address on this interface. Default none Mode Interface Config; Interface VLAN; Interface Range, which is indicated by the (conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#. Command History Related Commands Version 2.3 Added Interface Range and Interface VLAN modes. interface range interface vlan ip vrrp Defines an interface range and accesses the Interface Range mode Creates a new VLAN and assigns it an ID, and then enters the Interface VLAN mode, which provides access to VLAN configuration commands for the specified VLAN. Sets the VRID (virtual router ID) on an interface for virtual router configuration in the router. This command also has options. ip vrrp mode This command enables the virtual router configured on the specified interface. Enabling the status field starts a virtual router. 416 | Routing Commands