Dell Force10 S2410-01-10GE-24P SFTOS Command Reference - Page 232

www.dell.com | support.dell.com bootfile The command specifies the name of the default boot image for a DHCP client. The filename specifies the boot image file. The oe version of this command deletes the boot image name. Syntax bootfile filename no bootfile Default none Mode DHCP Pool Config clear ip dhcp binding This command deletes an automatic address binding from the DHCP server database. If "*" is specified, the bindings corresponding to all the addresses are deleted. address is a valid IP address made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid. Syntax clear ip dhcp binding {address | *} Default none Mode Privileged Exec clear ip dhcp server statistics This command clears DHCP server statistics counters. Syntax clear ip dhcp server statistics Mode Privileged Exec clear ip dhcp conflict The command is used to clear an address conflict from the DHCP Server database. The server detects conflicts using a ping. DHCP server clears all conflicts If the asterisk (*) character is used as the address parameter. Syntax clear ip dhcp conflict {address | } Default none Mode Privileged Exec 232 | DHCP Server Commands