Dell Force10 S2410-01-10GE-24P SFTOS Command Reference - Page 218

www.dell.com | support.dell.com Command History Related Commands Version 2.5.1 Deprecated copy Copy software from the stack management unit to a stack member. copy {image1 | image2} unit://unit/{image1 | image2} archive download-sw This command downloads the SFTOS software image (.OPR file) to the switch. The url is the transfer mode. The switch must be reset for the new code to start running. Syntax archive download-sw url Mode Stacking Config (prompt is "(config-stack)#") Command History Version 2.5.1 Deprecated Related Commands copy Download software to the stack management unit. copy tftp://tftp_server_ip_address/path/filename {image1 | image2} member Syntax This command is optional. The command is executed on the management unit to pre-configure the stacking characteristics of a switch that will join the stack. member unit switchindex The unit is the stack ID (from 1 to 8) to which you want to assign the switch that you are adding to the stack. The ID must be a currently unused number. The switchindex is the SID number of the supported switch type that is displayed by show supported switchindex, indicating the type of the switch being preconfigured. Use no member unit to remove the specified switch from the stack. Note: The required switch index (SID) can be obtained by executing the show supported switchtype command in User Exec or Privileged Exec mode. Mode Stacking Config (prompt is "(config-stack)#") Related Commands show supported switchtype stack Displays the switch index (SID) of supported switches Accesses the Stacking Config mode 218 | Stacking Commands