Dell Force10 S2410-01-10GE-24P SFTOS Command Reference - Page 253

set garp timer leaveall This command sets how frequently Leave All PDUs are generated per port. A Leave All PDU indicates that all registrations will be unregistered. Participants would need to rejoin in order to maintain registration. The value applies per port and per GARP participation. The time may range from 200 to 6000 (centiseconds). The value 1000 centiseconds is 10 seconds. Syntax set garp timer leaveall 200-6000 Use no set garp timer leaveall to set how frequently Leave All PDUs are generated per port to 1000 centiseconds (10 seconds). Note: This command has an effect only when GVRP is enabled. Default 1000 Mode Interface Config; Interface Port Channel Config; Interface Range, which is indicated by the (conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#. Command History Version 2.5.2 Version 2.5.1 Version 2.3 Unsupported: not tested in 2.5.2 Added Interface Port Channel Config mode Unsupported: not tested in 2.5.1 Interface Range mode added Related Commands interface range Defines an interface range and accesses the Interface Range mode show garp This command displays Generic Attributes Registration Protocol (GARP) information. Syntax show garp Mode Privileged Exec; User Exec Example Figure 15-89. Example of Using show garp Command (Force10#show garp GMRP Admin Mode Disable GVRP Admin Mode Disable Field Descriptions GMRP Admin Mode-The administrative mode of GARP Multicast Registration Protocol (GMRP) for the system. GVRP Admin Mode-The administrative mode of GARP VLAN Registration Protocol (GVRP) for the system GARP Commands | 253