Dell Force10 S2410-01-10GE-24P SFTOS Command Reference - Page 76
serial timeout, show serial, Privileged Exec and User Exec
View all Dell Force10 S2410-01-10GE-24P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
www.dell.com | support.dell.com serial timeout This command specifies the maximum connect time (in minutes) without console activity. Syntax serial timeout 0-160 A value of 0 means no console timeout. The range is 0 to 160 minutes. The no serial timeout command sets the maximum connect time (in minutes) without console activity to the 5-minute default. Default 5 Mode Line Config show serial This command displays serial communication settings for the switch. Syntax show serial Mode Privileged Exec and User Exec Example Figure 5-24. Sample Output of show serial Command (Force10 S50) #show serial Serial Port Login Timeout (minutes 20 Baud Rate (bps 9600 Character Size (bits 8 Flow Control Disable Stop Bits 1 Parity none Table 5-13. Fields of show serial Command Output Field Serial Port Login Timeout (minutes) Baud Rate Character Size Flow Control Description Specifies the time, in minutes, of inactivity on a serial port connection, after which the switch will close the connection. Any numeric value between 0 and 160 is allowed, the factory default is 5. A value of 0 disables the timeout The default baud rate at which the serial port will try to connect. The available values are 1200, 2400, 4800, 9600, 19200, 38400,57600, and 115200 baud (bps). The factory default is 9600 The number of bits in a character. The number of bits is always 8. Whether hardware flow control is enabled or disabled. It is always disabled. 76 | System Management Commands