Dell Force10 S2410-01-10GE-24P SFTOS Command Reference - Page 494
This command displays the table containing objects specific to a PIM domain. One row exists for each
View all Dell Force10 S2410-01-10GE-24P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 494 highlights
www.dell.com | support.dell.com Mode Privileged Exec and User Exec PIM-SM Admin Mode-This field indicates whether PIM-SM is enabled or disabled. This is a configured value. Join/Prune Interval (secs)-This field shows the interval at which periodic PIM-SM Join/Prune messages are to be sent. This is a configured value. Data Threshold Rate (K bits/sec)-This field shows the data threshold rate for the PIM-SM router. This is a configured value. Register Threshold Rate (K bits/sec)-This field indicates the threshold rate for the RP router to switch to the shortest path. This is a configured value. Unit/Slot/Port-Valid unit, slot and port number separated by forward slashes. Interface Mode-This field indicates whether PIM-SM is enabled or disabled on the interface. This is a configured value. Protocol State-This field indicates the current state of the PIM-SM protocol on the interface. Possible values are Operational or Non-Operational. show ip pimsm candrptable This command displays the IP multicast groups for which the local router is to advertise itself as a Candidate-RP when the value of hold time is non-zero. Syntax show ip pimsm candrptable Mode Privileged Exec and User Exec Group Address-This field specifies the IP multicast group address. Group Mask-This field specifies the multicast group address subnet mask. Address-This field specifies the unicast address of the interface that will be advertised as a Candidate-RP. show ip pimsm componenttable This command displays the table containing objects specific to a PIM domain. One row exists for each domain to which the router is connected. Syntax show ip pimsm componenttable Mode Privileged Exec and User Exec Component Index-This field displays a number which uniquely identifies the component. Component BSR Address-This field displays the IP address of the bootstrap router (BSR) for the local PIM region. 494 | PIM Commands