Dell Force10 S25-01-GE-24V FTOS 8.4.2.7 Command Line Reference Guide for E-Ser - Page 1560
clear hardware rpm mac counters, hardware monitor linecard
View all Dell Force10 S25-01-GE-24V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1560 highlights
www.dell.com | support.dell.com Example Figure 65-16. clear hardware linecard Command Example FTOS#clear hardware linecard 2 port-set 0 btm ingress errors FTOS#clear hardware rpm 1 port-set 0 btm ingress errors FTOS#clear hardware rpm 0 port-set 0 btm ingress errors % Error: RPM 0 is not active. FTOS# Related Commands show hardware btm Display the BTM counters clear hardware rpm mac counters e Clear the MAC counters for the party-bus control switch on the IPC subsystem of the RPM. Syntax clear hardware rpm slot-number mac counters Parameters slot-number Enter the RPM slot number. Range: 0 -1 Defaults No default behavior or values Command Mode EXEC EXEC Privilege Command History Version 6.5.4.0 Introduced hardware monitor linecard e Configure the system to take an action upon a line card hardware error. Syntax hardware monitor linecard asic {btm [action-on-error {card-problem | card-reset | card-shutdown}] | fpc [action-on-error | parity-correction]} Parameters action-on-error btm fpc card-problem card-reset card-shutdown parity-correction Enter the keyword action-on-error to further specify actions that should be taken in the event of a hardware error. Enter the keyword btm to configure the system to take an action upon a Buffer Traffic Manager hardware error. Enter the keyword fpc to configure the system to take an action upon a Flexible Packet Classifier hardware error. Enter the keyword card-problem to place a line card in a card-problem state upon a hardware error. Enter the keyword card-reset to reset a line card upon a hardware error. Enter the keyword card-shutdown to shutdown a line card upon a hardware error. Enter the keyword parity-correction to enable automatic parity corrections for SRAM. The line card must be reloaded before the feature becomes operational. 1560 | E-Series Debugging and Diagnostics