Dell Force10 S25-01-GE-24V FTOS 8.4.2.7 Command Line Reference Guide for E-Ser - Page 414

www.dell.com | support.dell.com Version 7.6.1.0 Version 7.8.1.0 Introduced IPv6 MGBP support for E-Series Introduced support on S-Series show ip bgp ipv4 multicast neighbors c et s Displays information on IPv4 multicast routes exchanged by BGP neighbors. Syntax show ip bgp ipv4 multicast neighbors [ipv4-neighbor-addr | ipv6-neighbor-addr] [advertised-routes | dampened-routes | detail | flap-statistics | routes | received-routes [network [network-mask]] | denied-routes [network [network-mask]]] Parameters ipv4 multicast ipv4-neighbor-addr | ipv6-neighbor-addr advertised-routes dampened-routes detail flap-statistics routes received-routes [network [network-mask] denied-routes [network [network-mask] Enter the ipv4 multicast keywords to view information only related to IPv4 multicast routes. (OPTIONAL) Enter the IP address of the neighbor to view only BGP route information exchanged with that neighbor. (OPTIONAL) Enter the keywords advertised-routes to view only the routes the neighbor sent. (OPTIONAL) Enter the keyword dampened-routes to view information on dampened routes from the BGP neighbor. (OPTIONAL) Enter the keyword detail to view neighbor-specific internal information for the IPv4 Unicast address family. (OPTIONAL) Enter the keyword flap-statistics to view flap statistics on the neighbor's routes. (OPTIONAL) Enter the keywords routes to view only the neighbor's feasible routes. (OPTIONAL) Enter the keywords received-routes followed by either the network address (in dotted decimal format) or the network mask (in slash prefix format) to view all information received from neighbors. Note: neighbor soft-reconfiguration inbound must be configured prior to viewing all the information received from the neighbors. (OPTIONAL) Enter the keywords denied-routes followed by either the network address (in dotted decimal format) or the network mask (in slash prefix format) to view all information on routes denied via neighbor inbound filters. Command Modes EXEC EXEC Privilege Command History Version 8.4.1.0 Version 7.8.1.0 Version 7.7.1.0 Version 7.5.1.0 Version 7.2.1.0 Version 6.3.10 Added support for the display of configured IPv4 multicast address families Introduced support on S-Series Introduced support on C-Series Added detail option and output now displays default MED value Added received and denied route options The output is changed to display the total number of advertised prefixes 414 | Border Gateway Protocol IPv4 (BGPv4)