Dell Force10 S5000 Installation Guide - Page 11
Hardware Overview, I/O Panel - switch
View all Dell Force10 S5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
4 Hardware Overview This section contains information about device characteristics and modular hardware configurations for the S5000. The S5000 has the following physical dimensions: • Height: 1.71 inches (43.5 mm) • Width: 17.4 inches (441.9 mm) • Depth: 28 inches (711.2 mm) The S5000 has a chassis design with 640Gbps switching bandwidth. The system also provides one DB9 RS-232 console port with YOST RJ-45 pinout and a dedicated Ethernet service port for out-of-band (OOB) management functions. I/O Panel All fixed data ports (4 × 40GbE quad small form-factor pluggable plus [QSFP+] ports) and the four slots for pluggable modules are on the I/O panel. The I/O panel includes: • Pluggable Modules - 12-Port Ethernet Module (1G/10G speeds) - 12-Port Fibre Channel Module (2G/4G/8G speeds) • 4 × 40GbE QSFP+ Ports and light emitting diodes (LEDs) Figure 2. S5000 I/O Panel 1. Slot 0 (supports Ethernet and Fibre Channel modules) 2. Slot 1 (supports only Ethernet modules) 3. Slot 2 (supports only Ethernet modules) 4. Slot 3 (supports only Ethernet modules) 5. Four 40GbE QSFP+ ports (each port ALSO supports 4 × 10GbE mode) NOTE: The LED displays for the system status are on both sides of the chassis. The fan and power status LEDs are on the Utility panel. 11